Contractor licensing

Oregon contractor license requirements

Oregon requires almost anyone paid to build, repair, or improve a structure to hold a license from the Construction Contractors Board (CCB). You pick an endorsement, complete 16 hours of training, pass an exam, post a bond, carry liability insurance, and pay $400 for a two-year license.

A contractor and plan reviewer discuss drawings and permit paperwork across an office desk.
Keep plans, permit requirements and approvals together when preparing construction work. AI-generated illustration.

Oregon has a true statewide contractor license, and it covers residential, commercial, general, and trade work alike. The Construction Contractors Board (CCB) issues it under ORS chapter 701. There is no separate "general contractor" exam the way some states run it. Instead, every applicant chooses an endorsement that matches the kind of structure it works on and how many trades it handles, and that endorsement sets the bond, the insurance, and the continuing education. Electrical and plumbing licenses are handled separately by the Oregon Building Codes Division, so shops in those trades should confirm what each agency requires.

Oregon CCB license at a glance
ItemOregon rule
Licensing agencyConstruction Contractors Board (CCB), Salem
Who needs itAnyone paid to perform or arrange construction work, with limited exemptions in ORS 701.010
Small job exemptionCasual, minor work under $1,000 per project, and only if you do not advertise as a contractor
Pre-license training16 hours from a CCB-approved provider, completed by the Responsible Managing Individual (RMI)
Exam80 questions, open book, 3 hours, 70 percent to pass (56 correct), $60 paid to PSI
Application fee$400 for a two-year license (renewal is also $400)
Bond$15,000 to $80,000 depending on endorsement
Liability insurance$100,000 per occurrence up to $2 million aggregate depending on endorsement
Workers' compRequired with employees; commercial endorsements must carry it
ReciprocityNo reciprocity path found on the CCB site; NASCLA commercial exam passers skip the training but still take the Oregon exam
License lookupsearch.ccb.state.or.us

Who needs an Oregon CCB license

If you get paid to build, remodel, repair, or arrange construction on someone else's property, plan on needing a license. That includes subcontractors, not just the general contractor holding the prime contract. The exemptions in ORS 701.010 are narrow. The one contractors ask about most is casual, minor, or inconsequential work where the total of all your contracts on one structure or project is less than $1,000. That exemption disappears the moment you advertise, hand out cards, or put up a sign suggesting you are a contractor. Other exemptions cover employees of a licensed contractor, material suppliers who do not install, owners working on their own property who are not building to sell, and some licensed professionals working inside their own license.

Choosing an endorsement: residential, commercial, or both

The endorsement is the decision that drives everything else, so get it right before you buy a bond. Oregon sorts work by the type of structure. A residential structure is a site-built home, a building with dwelling units that is four stories or less above grade, a separately owned condo unit, a modular or manufactured home, or a floating home. A small commercial structure is a nonresidential building of 10,000 square feet or less and not more than 20 feet high, a tenant unit of 12,000 square feet or less and not more than 20 feet high, or any structure where the entire contract price of all work on it is $250,000 or less. Everything else is large commercial: hospitals, parking garages, malls, apartments over four stories.

A residential endorsement lets you work on residential and small commercial jobs. A commercial endorsement covers small and large commercial. Say a remodeler who mostly does kitchens lands a $410,000 restaurant build-out in a strip center. If that project counts as large commercial, the residential license alone does not cover it, and the contractor needs a commercial endorsement too. Holding both means two bonds and one liability policy at the higher of the two required limits.

Main CCB endorsements, bond, and liability insurance (CCB endorsement chart, 11/2024)
EndorsementWhat it allowsBondLiability insurance
Residential General ContractorUnlimited unrelated trades on residential and small commercial$25,000$500,000 per occurrence
Residential Specialty ContractorOne or two unrelated trades (or 3+ trades if the contract is $2,500 or less)$20,000$300,000 per occurrence
Residential Limited ContractorPart-time work: under $40,000 gross a year, no contract over $5,000$15,000$100,000 per occurrence
Commercial General Contractor Level 1Unlimited trades on small and large commercial; 8 years key employee experience$80,000$2 million aggregate
Commercial General Contractor Level 2Same work as Level 1; 4 years key employee experience$25,000$1 million aggregate
Commercial Specialty Contractor Level 1One or two trades on commercial; 8 years experience$55,000$1 million aggregate
Commercial Specialty Contractor Level 2One or two trades on commercial; 4 years experience$25,000$500,000 per occurrence

Bond amounts went up $5,000 for every endorsement on January 1, 2024, under House Bill 2922, so older guides quoting $20,000 for a residential general contractor or $75,000 for Commercial Level 1 are out of date. There are also residential and commercial developer endorsements (for owners who hire licensed GCs and build to sell) and restricted endorsements for home inspectors, locksmiths, home services warranty companies, home energy score contractors, and restoration contractors.

How to get a contractor license in Oregon, step by step

  1. Pick your Responsible Managing Individual. The RMI must be an owner, officer, partner, or employee with management or supervisory authority over construction. A temporary RMI designation lasts at most 14 days, so some firms name more than one RMI.
  2. Complete 16 hours of pre-license training from a CCB-approved provider and pass the exam through that provider. You must be at least 18. The exam is open book and based on the Oregon edition of the NASCLA Contractors Guide to Business, Law and Project Management. Apply within 24 months of passing.
  3. Choose your endorsement using the CCB endorsement chart. Commercial applicants also certify that key employees have the required years of experience.
  4. Register the business (corporation, LLC, or assumed business name) with the Oregon Secretary of State, Corporation Division.
  5. Get the surety bond on the CCB's own bond form, in the amount for your endorsement, with a power of attorney.
  6. Get general liability insurance that includes products and completed operations coverage, from an insurer listed with the Oregon Insurance Division, with the Construction Contractors Board named as certificate holder.
  7. Set up workers' compensation if you will have employees, plus state and federal tax account numbers.
  8. Apply online and send the bond, insurance certificate, signature form, and the $400 fee together. The CCB says processing takes six to eight weeks, so apply early.

Keeping the license: renewal, continuing education, and your CCB number

Licenses run two years and renew for $400. Changing an endorsement, inactivating, or reactivating costs $20 each. Residential contractors cannot renew until the CCB has proof of continuing education: 16 hours per cycle if licensed under six years (3 hours of CCB laws, regulations, and business practices classes plus 13 hours of other approved courses), or 8 hours if licensed six years or more (3 plus 5). Commercial Level 2 contractors need 32 hours from key employees each cycle. Commercial Level 1 hours scale with key employees, from 16 hours with one key employee up to 80 hours with five or more. The CCB audits commercial renewals at random, so keep the certificates for at least 24 months.

Your CCB number has to appear on business cards, written bids, construction contracts, websites and other ads, letterhead, job site signs, inspection reports, and signed business vehicles. The CCB says leaving it off an ad violates OAR 812-003-0120 and can bring a fine of up to $400. Pens and magnets are exempt where the number does not fit.

Oregon contractor license lookup

Check any Oregon contractor at the CCB license search (search.ccb.state.or.us). Searching by CCB number is the most accurate; you can also search by business name, last name, or in some cases phone number, and filter to active licenses. For a GC, run every sub before they mobilize and again before final payment. An expired bond or lapsed policy on a sub is your problem when a claim lands. The same habit protects your Oregon lien rights, and if you bid public jobs, Oregon also requires a separate $30,000 public works bond on qualifying projects over $100,000 (see Oregon prevailing wage rules).

Tracking CCB numbers, bond expirations, and insurance certificates for 20 subs in a spreadsheet works until it does not. Smart Business Automator keeps sub licenses and COIs on file with expiration alerts as part of subcontractor compliance automation. The manual method is covered in how to track subcontractor insurance certificates.

Frequently asked questions

How much does an Oregon contractor license cost?

The CCB application fee is $400 for a two-year license (it was $325 for applications received by June 30, 2025). The exam is $60, paid to PSI. On top of that you pay for the 16-hour pre-license course, the surety bond premium, and liability insurance, which vary by endorsement and provider.

Does Oregon have a general contractor license?

Yes, as an endorsement on the CCB license. Residential General Contractor covers unlimited trades on residential and small commercial work. Commercial General Contractor Level 1 or Level 2 covers small and large commercial work. Contractors doing both residential and large commercial work need both endorsements.

Does Oregon accept contractor licenses from other states?

The CCB licensing pages describe no reciprocity path for other state licenses, so confirm with the CCB. If you passed the NASCLA Accredited Commercial General Building exam, you can skip the 16-hour training, but you still have to pass the Oregon exam and meet the bond, insurance, and other requirements.

Can I do small jobs in Oregon without a license?

Only casual, minor, or inconsequential work where all your contracts on one project total less than $1,000, and only if you do not advertise or hold yourself out as a contractor. If you market your services, you need a license regardless of job size.

Do electricians and plumbers need a CCB license?

Electrical and plumbing licenses are issued by the Oregon Building Codes Division, not the CCB. The CCB license search itself points you to the Building Codes Division for those licenses. Confirm with both agencies what your business needs before you bid.

Sources

  1. Oregon Construction Contractors Board: How to Get a License
  2. Oregon Construction Contractors Board: Licensing (2024 bond increase, public works bond)
  3. Oregon Construction Contractors Board: CCB License Endorsements chart (11/2024)
  4. Oregon Construction Contractors Board: Continuing Education
  5. Oregon Construction Contractors Board: Contractor Toolbox, Spring 2025 (CCB number on advertising)
  6. ORS 701.010: Exemptions (statute text)
  7. Oregon CCB: License search

Laws and rates change. Confirm current requirements with the state agency before you bid, file, or pay. This page is general information, not legal advice.

Written and edited by

Maurice Francois writes and edits construction operations guides for Smart Business Automator. More from Maurice on the Scaling Legends podcast.

Get a free assessment