Workers compensation pays medical bills and lost wages for employees hurt on the job, and in exchange generally limits their right to sue the employer. Each state runs its own system, premiums are driven by payroll, job classification, and claims history, and an uninsured sub can end up on your policy at audit.
Plan reviews connect field conditions, drawings, and the next decisions on a job. AI-generated illustration.
Workers compensation is state-mandated insurance that covers employees' medical care and lost wages after a work injury or illness. For contractors, three things matter most: your state's rules decide whether you must carry it and where you can buy it; your premium is estimated up front from payroll by job class and then corrected by an audit; and subcontractors without their own coverage can be treated as your employees for premium and, in some states, for liability.
How workers comp is regulated
There is no single national workers comp program for private employers. The U.S. Department of Labor's Office of Workers' Compensation Programs runs federal programs (federal employees, longshore and Defense Base Act, coal mine, and nuclear weapons workers) and keeps a directory pointing to each state's workers compensation agency. For a typical contractor, the state agency is the rulebook.
Where you buy coverage depends on the state
Most states: buy from a private carrier, a state fund that competes with private carriers, or self-insure if you qualify.
Monopolistic states: Ohio, North Dakota, Washington, and Wyoming require employers to buy from the state fund. Those state policies do not include employer's liability coverage, which many contractors add as stop gap coverage endorsed onto a general liability policy.
Texas: the Texas Department of Insurance says private employers can choose to carry workers comp, but it is not required in most cases. Employers without it (nonsubscribers) must report that status to the state and report certain injuries, illnesses, and deaths. Contract terms and public owners often require it anyway.
Rules on who must be covered, how small a company can be before coverage is required, and whether owners and officers can be excluded vary by state. Check your state agency through the DOL directory before relying on any general rule.
How the premium works for a construction company
Workers comp premium is built from your payroll, split by job classification code, each with its own rate. Field trades carry higher rates than clerical work. The total is then adjusted by your experience modification factor, which compares your claims history to what is expected for a company of your size and mix. See how to calculate a construction company EMR and how to lower your experience modification rate.
The policy starts with an estimated payroll. After the policy year, the carrier audits your actual payroll by class and bills or refunds the difference. Contractors get surprised at audit in three ways: payroll grew more than estimated, employees were coded to the wrong class, or the carrier found payments to subcontractors who had no coverage of their own.
Workers comp and subcontractors
If a sub has no workers comp, the auditor may treat what you paid that sub as your payroll and charge premium on it. Depending on the state, a general contractor may also be treated as the employer of an uninsured sub's injured worker when benefits are owed. Ask your broker how your state handles it. That is why a current certificate showing statutory workers comp coverage belongs in every subcontractor file. On the standard ACORD 25 certificate, check the statutory limits box, the employer's liability limits, and the question asking whether any proprietor, partner, or officer is excluded. See what a subcontractor COI should include.
Many contracts also require a waiver of subrogation on the sub's workers comp policy. A common form is NCCI's WC 00 03 13, under which the carrier agrees not to enforce its right to recover payments from the party named in the schedule, to the extent a written contract requires it.
Crews working in other states
A Kansas City contractor that sends a crew across the river to a Missouri job, or a Georgia GC that picks up work in South Carolina, needs to know whether its policy covers employees working in that state. Policies list the states they cover, and coverage written for one state may not satisfy another state's rules. Tell your broker about every out-of-state job before mobilizing, not after the first injury. A monopolistic state job may require a separate policy from that state's fund.
Workers comp claims and OSHA records are separate
An injury can be a comp claim, an OSHA recordable case, both, or neither. The carrier decides the claim under state law. You decide recordability under 29 CFR Part 1904. Run both processes for every injury, and see OSHA recordkeeping for contractors for the second one.
How to manage workers comp in 6 steps
Confirm your state's rules for every state where you have employees working, including out-of-state jobs.
Classify payroll correctly from day one. Track hours by class code in payroll, especially for employees who split time between field and office.
Collect sub certificates before the first payment and track expirations.
Report injuries fast to your carrier and handle return-to-work with light duty where possible. Claims drive your mod.
Prepare for audit with payroll by class, subcontractor payments, and certificates for every sub you paid.
Review the mod every year with your broker and check the claim data behind it.
Worked example: an audit surprise
Say a remodeling contractor estimated $600,000 in field payroll for the year. During the year it hired three small subs for demo and drywall and paid them $90,000 in total. Two of the three had certificates on file. The third, paid $28,000, did not.
At audit, actual field payroll comes in at $660,000. The auditor also adds the $28,000 paid to the uninsured sub to the contractor's payroll in a field class. The contractor now owes premium on $688,000 instead of $600,000. The extra $60,000 of its own payroll was unavoidable. The $28,000 was not. A certificate on file, or a requirement that the sub carry coverage before starting, would have kept it off the bill. Your carrier's audit rules control the exact treatment.
Mistakes to avoid
Underestimating payroll to lower the deposit premium, then getting a large audit bill.
Putting all field payroll in one class when crews do different trades.
Paying subs without certificates, or with expired ones.
It depends on your state and your contracts. Some states let sole proprietors exclude themselves, and some GCs require subs to carry a policy anyway. Check your state agency and your subcontract.
Which states require workers comp from a state fund?+
Ohio, North Dakota, Washington, and Wyoming are monopolistic states where employers buy coverage from the state fund. Employer's liability is not included, so contractors often add stop gap coverage.
Is workers comp required in Texas?+
The Texas Department of Insurance says private employers can choose to carry it but it is not required in most cases. Nonsubscribers must report that status to the state and report certain injuries. Many contracts require coverage regardless.
Why did my workers comp audit charge me for subcontractors?+
Carriers may treat payments to subcontractors without their own coverage as your payroll. Keep current certificates for every sub you pay and give them to the auditor.
What is a waiver of subrogation on workers comp?+
An endorsement such as NCCI form WC 00 03 13 in which the carrier agrees not to pursue recovery from a named party, usually the GC or owner, when a written contract requires the waiver.
480,399 construction apprentices in 2025, up 28% in 5 years. IRA offers 5x prevailing wage multiplier for registered apprentices. The federal government is paying you to train workers. This is the complete guide.
Starts muted when the player comes into view.
Read the full episode transcript
Published transcript from Scaling Legends. It may contain transcription errors. View the source transcript.
Right now, there are over half a million unfilled construction jobs in America. Just think about that for a second. It's a staggering number. It really is. 500 ,000 open roles that simply cannot be filled because, well, the bodies just aren't there. And it actually gets worse. Oh, yeah. Much worse. Because the average age of the workers you do have is sitting at 42 .5 years old. They are creeping closer to retirement. Every single day. So if you are running a construction business and you need to hire right now, you aren't just facing a tough market. You are basically walking into a burning building. You really are. It is a literal demographic time bomb. Right. The current workforce is aging out, you know, significantly faster than it could be replaced.
Right. And if we look at the standard operating procedure for most construction business owners like realizing you need capacity, putting out a job listing and just trying to poach someone. It's completely shattered. Yeah, it just doesn't work anymore. Exactly. You're fighting over this incredibly shrinking pool of, frankly, very expensive talent. Trying to hire from the open market right now is essentially like bidding in a silent auction where everyone else in the room is a billionaire. That's a great way to put it. You just cannot win. But, and here's the mission for today's deep dive, we are going to explore a highly lucrative, entirely different strategy to solve this. A much smarter strategy. Yes. Smart contractors are completely bypassing this hiring nightmare by building their own workforce pipeline from
scratch. And the kicker. The federal government is actually offering massive financial incentives to help you do it. Which is wild. But we really have to understand the sheer scale of the financial drain happening on the open market first. Oh, for sure. Set the baseline for us. So if you are a contractor desperately trying to fill a role right now, you're looking at market hires that cost anywhere between $80 ,000 and $100 ,000. Just to get someone in the door. Exactly. And because the market is so incredibly tight, those expensive hires have almost zero loyalty. I mean, the moment a competitor down the road offers them, say, $2 more an hour. They're gone. They are gone. It is a brutal, entirely unsustainable cycle for long -term growth. Which brings us to the countertrend. And we can see exactly where
the smart money is moving right now, thanks to Smart Business Automator's market intelligence report. The numbers in there are really telling. They are, because while everyone else is fighting over that shrinking pool, a quiet boom is happening in apprenticeships. According to the data for 2025, there are 480 ,399 construction apprentices currently in training. That's a massive jump. It's a 28 % increase over just five years. That brings the total number of apprentices nationally to around 680 ,000. And, you know, it represents a fundamental shift in business mindset. Most successful forward -thinking construction companies are transitioning away from buying talent. Right, because the store is empty. Exactly. They realize the open market is broken. So instead, they're
moving toward manufacturing their own talent. Manufacturing talent. I love that. So instead of fighting over, like, incredibly expensive bottled water in the middle of a desert, building an apprenticeship program is like digging your own well. That's exactly it. You are creating the resource yourself. But let's get into the hard numbers here because I really want to know what this manufacturing process actually looks like on paper. Sure. Is it genuinely a sound financial investment for the business owner? Let's break down the mechanics. We are talking specifically about Department of Labor or DOL registered programs. Okay. So these aren't informal, you know, shadow my foreman for a week. setups. These are rigorous, typically four -year programs that combine hands -on, on -the -job training with formal classroom instruction. Right. And
from day one, these apprentices are paid employees, right? Yes. They are earning while they are learning. The entry salaries for these apprentices start at around $35 ,000. Okay. That's super accessible. Very. And as they progress through that four -year pipeline and hit journeyman status, they jump up to earning between $65 ,000 and $105 ,000, depending on the trade. Right, like electricians, for instance. They sit at the highest end of that spectrum, pulling in $95 ,000 to $105 ,000 once fully trained. Exactly. And at the end of it, they walk away with a nationally recognized credential. It provides a highly structured path to a lucrative career. Which is exactly what a younger demographic is looking for right now, right? Stability without the crushing weight of traditional college debt. Bingo. OK, but wait,
I have to push back here for a second. Looking at the broader industry data, these apprenticeship programs generally have a 50 to 60 percent completion rate. Right. That is the industry average. So if a business owner is paying $10 ,000 to $15 ,000 a year just to train someone and there's basically a coin flip chance that the 18 or 19 year old actually finishes the four years. Isn't that a massive financial risk? It sounds like it, yeah. I mean, you're sinking tens of thousands of dollars into someone who might just decide, you know, construction isn't for them and just walk away. That is the exact hesitation that keeps a lot of contractors stuck in the old way of hiring. Yeah. But you have to frame the return on investment correctly here. Okay, how so? Yes, you are spending $10 ,000 to $15 ,000 a year on training. But compare that against the alternative
spending $80 ,000 to $100 ,000 on a market hire who has zero allegiance to your company and, like we said, might leave in six months anyway. That's a fair point. You're bleeding money either way, but one has a potential upside. Precisely. And here is the real metric that changes the math regarding that completion rate. For the 50 to 60 percent who do complete your program, the retention rate at their training employer is over 80 percent. Wait, really? Over 80 percent retention? That's almost unheard of in this current market. It is because employer trained workers exhibit incredibly high loyalty. You really have to think about the psychology of it. Right. They feel indebted to you. Exactly. You aren't just teaching them how to swing a hammer or wire a panel. You are teaching them your company's way
of doing things. You gave them their start when they knew nothing. So the ROI isn't just saving money on the initial entry -level salary. It's the long -term stability of your workforce. You're building a crew that actually wants to stay with you. Exactly. Okay, the financial logic holds up. Why is this strategy exploding right now? Why are we seeing this massive 28 % spike over the last five years? Oh, this is the best part. The answer lies in some newly available, frankly absurd, financial subsidies, right? Yes. This is where the landscape has completely transformed. The federal government has finally recognized
the severity of this demographic time bomb, and they are aggressively subsidizing the solution. Aggressively is the right word. The biggest game changer here is the Federal Inflation Reduction Act, or the IRA. Let's talk about the IRA, because when I saw this, it blew my mind. The IRA offers a 5x prevailing wage multiplier for registered apprentices on qualifying projects. It's math. Let me just repeat that. A 5x multiplier. But let me pause you there. When we say prevailing wage... For the listener who maybe doesn't bid on massive federal contracts every day, what exactly does that mean? Great question. So prevailing wage is essentially the baseline hourly rate and benefits package set by the Department of Labor for a specific trade in a specific geographic area. OK, so it varies by location. Right. It's
usually aligned with union rates to ensure fair pay on government funded projects. Now, under the IRA. If you are working on qualifying clean energy or infrastructure projects and you meet their specific requirements for using registered apprentices. Your base tax credits and deductions multiply by five. Exactly. Your base tax credits just explode. So because of this multiplier, your HR pipeline is no longer just an operational expense. It actually transforms into a direct revenue generating tax strategy. It completely flips the script. I mean, it can literally be the difference between a project being moderately profitable. And it doesn't even stop the IRA. The Department of Labor is actively throwing money at this issue. They really are. They are currently offering $145 million in grants specifically
to expand apprenticeship programs. Then you have state level incentives piling on top of that. Right. The states are getting involved, too. Louisiana has a specific tax credit. Texas is putting $6 million into the pot. New Jersey has a $1 .5 million incentive program. Plus, you can utilize the GI Bill to help fund veteran apprentices. Which is amazing because that brings incredibly disciplined, hardworking individuals right into your pipeline. Exactly. When you stack that 5x IRA multiplier, the federal grants, the state tax credits, and the GI Bill. The government is practically begging contractors to build these programs. They are heavily subsidizing your business's growth. But I'm going to play devil's advocate again here. Go for it. With all these federal and state grants, the IRA compliance, the DOL
registration isn't tracking all that red tape a total nightmare. Most contractors I know got into the business to build things, not to become full -time compliance officers for the federal government. It is a totally valid concern. And honestly, it's the exact friction point that trips people up. But before we solve that administrative bottleneck, we need to look at the actual physical playbook. Right. How to actually do it. Yeah. If you are listening to this right now and want to launch a program tomorrow to capture these incentives, how do you navigate the logistics? Let's get into the step -by -step. First, we have to talk about the divide in the industry because you have two main pathways when you set this up. You have the ABC model, which is the Associated Builders and Contractors, and you have the Union JATCs, which stands for Joint
Apprenticeship and Training Committees. It's vital to understand the mechanical difference between the two. Break that down for us. So the ABC model is open shop and competency -based. What this means on a day -to -day level is that an apprentice advances based on demonstrating specific skills. If an apprentice can prove they know how to perfectly rough in a plumbing system after three months, they move forward, regardless of how long it took them to learn it. Got it. And the union GATCs, on the other hand, are strictly time -based. You have to put in a highly specific number of hours, let's say 8 ,000 hours of on -the -job training, to advance to journeyman status. Exactly. It guarantees a standardized level of exposure to every possible situation.
And we should note... Both of these pathways produce highly qualified, exceptional workers. The choice between ABC and union purely depends on your specific business model and how your company operates. Absolutely. There is no right or wrong answer there, just what aligns with your company's culture. Okay, so once you've chosen your pathway... There are five core steps to actually starting the program. Step one is registering with the Department of Labor. Which is the main bureaucratic hurdle. And you should expect it to take anywhere from one to three months to get fully approved. Step two is defining the trade and the curriculum. You need to map out exactly what these apprentices are going to learn over the next four years. Right. And step three is finding an instruction provider. Remember, this requires formal classroom instruction, but you do not have to build a school yourself. Thank goodness. Yeah. You just partner with local.
community colleges, vocational schools, or trade associations to handle all the classroom theory. Step four is hiring. And the recommendation here is to hire just two to three apprentices. Yes. Okay, I have to jump in on step four. You say just hire two or three. But if I'm a contractor drowning in work, Babysitting two entirely green 18 -year -olds sounds like a massive drag on my site foreman. It does sound like a lot of work. How is that actually accessible? Doesn't it just slow the whole job site down? That is a common fear, but keeping it to just two or three is exactly how you mitigate that drag. You don't need to build a massive, sprawling corporate academy. You don't dump 30 untrained kids onto a job site on day one. Right, that would be a disaster. By starting with just two or three. You are proving the concept within
your own company. You test the waters. You see how your foremen handle the mentorship. You refine your internal processes. And you scale up slowly from there without derailing your current projects. That makes a lot of sense. Which leads right into step five. Pair them with mentors. You take your experienced journeymen, your veterans who are maybe getting close to that 42 .5 average age or older, and you pair them up with the new kids. Exactly. They pass down the institutional knowledge. Okay. So you've got your two or three apprentices, you're registered with the DOL, and you are starting to qualify for that 5x IRA multiplier. The pipeline is flowing. But this brings us right back to your earlier point about the red tape. Right. Because a major roadblock to adding more apprentices and taking on more
of these heavily incentivized projects is the massive increase in administrative burden. How do companies manage this growing workforce and ensure they are staying compliant with all these grants without just turning around and hiring an army of middle managers? It's a huge problem if you try to do it manually. Right. Because if you have to hire five expensive administrative staff just to track the paperwork for 10 apprentices, your ROI completely evaporates. This is where we have to look at how technology is completely solving the compliance and scaling bottleneck. And this brings us back to Smart Business Automator. Yes, and for a quick background for the listener, Smart Business Automator is an AI platform built specifically for construction companies. So to solve that worry about drowning in red tape, this platform actively tracks the incentive eligibility
and the certification status for your workforce automatically. If you think about scaling your business, you quickly realize that managing a modern construction company isn't just about bodies on the ground. It is fundamentally about information flow. Exactly. on more complex projects to utilize these tax credits, the volume of data, daily logs, RFIs, submittals, permits grows exponentially. Okay, here's how I picture it. If these new apprentices are the fresh muscles of your company, an AI platform is the central nervous system. Oh, I like that. You can't just slap on more muscle without a nervous system to coordinate it, or you'll just trip over your own feet. You need the brain to tell the muscle what to do, when to do it, and to keep track of it all. That analogy hits the nail on the head. The platform acts
as an AI project assistant that uses natural language smart search. So instead of a project manager spending three hours digging through incredibly disorganized digital folders to find a specific permit to prove DOL compliance. Which we've all done. Right. They just ask the system in plain English and it retrieves the exact document instantly. And it handles smart document organization. It automatically tags photos, plans, and permits. It does daily log and meeting summaries, extracting the key action items so your experienced managers aren't wasting hours typing up recap. Yes, they can actually spend their time on the job site mentoring those new apprentices. But we have to talk about how this AI actually works because it's not just a fancy filing cabinet. Take RFIs,
for example. Right, requests for information. Normally, an RFI is so tedious. A project manager spends hours digging through past emails and old blueprints to answer a technical question from the field. But this AI provides RFI assistance using historical context. Which is huge. It is. Meaning it actually reads how you solved a similar problem on a job site two years ago and drafts the response for you based on your company's own history. And that ties perfectly into its document intelligence capabilities. The AI extracts crucial details from specs and drawings, which directly protects your bottom line during scaling. Because mistakes are expensive. Incredibly expensive. When you are managing a greener workforce like these new apprentices. The risk of missing a highly specific spec goes way up. The AI acts
as a safeguard. It cross -checks the specs before the work is done, catching gaps early before they become an incredibly expensive tear -out. It also gives leadership schedule risk detection, budget and variance insights, and change order impact analysis. And here's a huge piece for the back office. It features custom AI workflows and API integrations with your existing ERP systems. That is a lifesaver for the accounting team. For sure. For those who aren't tech nerds, an ERP system is essentially the financial software you already use to run your business operations. Because the AI talks directly to that software, there is no double data entry. You are streamlining the administrative side so heavily that the cost of managing the apprenticeship program becomes negligible compared to the massive tax value it brings in. It ensures that project managers
can oversee these new crews and maintain project health monitoring without being completely buried in manual coordination. So what does this all mean for you, the listener? We've covered a ton of ground today. We looked at the grim reality of the 500... thousand unfilled jobs and the 42 .5 average age. The burning building. Yes. We explored the financial logic of manufacturing your own talent through a registered apprenticeship. We broke down those massive federal and state incentives, especially that 5x IRA multiplier that turns HR into a tax strategy. And we looked at how AI systems act as the central nervous system to scale that fresh muscle without drowning in paperwork. And as we wrap up, this leaves us with something entirely new to mull over. We've talked about how private construction companies
are being heavily subsidized to build these in -house training academies. If this trend continues to accelerate, what happens to the traditional vocational schools and community colleges? Are we looking at a future where private construction companies completely replace the traditional education system for the trades? Wow. It is a fascinating shift in who controls the future of education in this country. That is a wild thought to leave on. The entire landscape of construction hiring and training has permanently changed. The tools to build and manage this pipeline to dig your own well are available to you right now. It's time to stop buying and start building. If you know a contractor who is struggling to hire and dealing with this massive labor shortage, send them this deep dive. It could completely change how they scale their business this year.
Hit follow on whatever app you're listening on so you don't miss tomorrow's Intel. And be sure to visit smartbusinessautomator .com to explore the platform we discussed today. Keep building, and we'll see you next time.
