Georgia prevailing wage and certified payroll rules
Georgia has no state prevailing wage law, so purely state and local public work carries no state wage schedule. Federal Davis-Bacon applies to federally funded or assisted construction over $2,000, including CDBG and federal education money passed through Georgia agencies.
Review invoices, committed costs, and cash timing together before making project decisions. AI-generated illustration.
Georgia does not have a state prevailing wage law. The U.S. Department of Labor lists Georgia among the states without one. That does not mean Georgia public work is always wage-free. Any construction contract over $2,000 that is federally funded or assisted falls under the federal Davis-Bacon Act and its Related Acts, with federal rates and weekly certified payroll. In Georgia, that often arrives through grant programs run by state agencies, such as Community Development Block Grants administered by the Department of Community Affairs (DCA).
Georgia prevailing wage at a glance
Rule
Georgia
State prevailing wage law
None (U.S. DOL lists Georgia among states without one)
State or locally funded public work
No state wage schedule or state certified payroll requirement
Federal prevailing wage
Davis-Bacon and Related Acts on federally funded or assisted contracts over $2,000
Who sets rates
U.S. Department of Labor, published on SAM.gov
Certified payroll
Weekly, with a signed Statement of Compliance; Form WH-347 is optional
Record retention on DCA CDBG jobs
Three years after project completion; prime keeps all sub payrolls
Overtime law on larger federal contracts
Contract Work Hours and Safety Standards Act on contracts over $100,000
What applies on Georgia public work
Think of Georgia public work in two buckets. A county building a new fire station with local sales tax money has no prevailing wage requirement, because there is no Georgia statute to apply. A city rebuilding a water line with a CDBG award, or a school district renovating a building with federal education funds, is on a federally assisted project, and Davis-Bacon applies. The U.S. Department of Labor says the Related Acts carry prevailing wage requirements into construction that federal agencies support through grants, loans, loan guarantees, and insurance.
The money does not have to cover the whole job. Georgia DCA's federal labor standards training says Davis-Bacon applies to the entire project, not just the CDBG-funded portion. If a $1.8 million community center gets a $500,000 CDBG grant, the whole job is a Davis-Bacon job.
Davis-Bacon on Georgia CDBG projects
DCA's 2025 federal labor standards presentation lays out the steps a grant recipient and its contractors follow. They are a good picture of what a Georgia contractor will see on any grant-funded job:
Wage rate request: the recipient asks DCA for the wage decision 30 days before advertising for bids, then runs a 10-day wage check before bid opening. The rates must be in the bid package and the contracts.
Lock-in: on competitively bid work, the wage decision locks at bid opening if the contract is executed within 90 days. If not, the recipient resubmits the 10-day check and the decision locks at contract execution.
Contractor clearance: DCA confirms the contractor is not on the federal debarred list before the contract is signed.
Pre-construction conference: mandatory, with the architect or engineer, grant administrator, contractor, and local government, to cover Davis-Bacon and contract provisions.
Payroll review: the recipient compares payrolls with the wage decision and with job site interviews of workers, and follows up on discrepancies.
Payroll rules DCA spells out
Contractors submit all payrolls to the grant recipient.
Each payroll lists the worker's classification, which must match the wage decision, plus the hourly rate, hours worked, and permissible deductions.
Payrolls are numbered, and the last one is labeled "Final Payroll."
Payrolls are certified by the owner, an officer, or a designee of the company; digital signatures are acceptable.
Sole proprietors cannot self-certify wages without a crew and must be reported on the responsible employer's payroll.
Every contractor keeps records for three years after completion, and the prime keeps a complete set of every sub's payrolls and subcontracts for the same period.
If the wage decision has no classification for work on the job, the recipient submits a conformance request; the proposed rate must bear a reasonable relationship to rates already in the decision.
DCA also points out the Contract Work Hours and Safety Standards Act, which requires overtime for hours over 40 on contracts over $100,000. DCA's slides list liquidated damages of $10 per day per violation, but that figure is out of date: the current federal contract clause in 29 CFR 5.5(b)(2) sets $33 for each worker for each calendar day of unpaid overtime, and the amount is adjusted for inflation.
Federal education money on Georgia school projects
A Davis-Bacon overview posted by the Governor's Office of Planning and Budget explains that under 20 U.S.C. 1232b, a Related Act, Davis-Bacon applies to construction, repair, or alteration contracts over $2,000 financed by federal education funds. A local educational agency using that money must include the contract clauses in 29 CFR 5.5, keep contractor certified payroll records, and submit them to the State, which monitors compliance. If you build for Georgia school districts, ask at the pre-bid meeting whether any federal education money is in the project.
Rates and certified payroll forms
Davis-Bacon rates come from the U.S. Department of Labor and are published on SAM.gov, which is open to the public. DCA's training groups wage decisions into four categories: heavy, highway, building, and residential. Use the one in your contract, and read how to find the right Davis-Bacon wage determination if you are pricing before the specs are final.
Certified payroll is weekly, with a signed Statement of Compliance. Form WH-347 is the federal template, but its use is optional as long as the required information is reported. Our step-by-step guide on filling out the WH-347 covers each column.
How Georgia compares with prevailing wage states
In states with their own law, contractors track a state schedule on state jobs and Davis-Bacon on federal ones. In Georgia there is only the federal side, so the work is in spotting it. Read every public bid package for a wage decision, a reference to Davis-Bacon, or HUD, EPA, or Department of Education funding language. Price labor at the federal rate from the start, because the wage decision is fixed in the contract and your bid has to carry it.
No. Georgia has no state prevailing wage law. Federal Davis-Bacon applies when a construction contract over $2,000 is federally funded or assisted.
Do Georgia CDBG projects require prevailing wages?+
Yes. CDBG is federal assistance, so Davis-Bacon applies, and Georgia DCA's training says it applies to the entire project, not just the CDBG-funded portion.
Where do I find prevailing wage rates for a Georgia project?+
Davis-Bacon wage determinations are published by the U.S. Department of Labor on SAM.gov. On DCA-funded projects, the recipient requests the wage decision from DCA and includes it in the bid package.
How long must certified payroll records be kept on Georgia CDBG jobs?+
DCA says every contractor must keep records for three years after the project is complete, and the prime must keep a complete set of every subcontractor's payrolls for the same period.
Can I sign certified payroll electronically on a Georgia DCA project?+
DCA's training says payrolls must be certified by the owner, an officer, or a designee of the construction company, and digital signatures are acceptable.
Laws and rates change. Confirm current requirements with the state agency before you bid, file, or pay. This page is general information, not legal advice.
Highway and bridge construction is projected at a record $209 billion in 2026. The IIJA allocated $350 billion for highways. 14 states are getting $1 billion+ per year. But the law expires September 30 with no replacement bill. This episode is the complete guide to getting DOT-prequalified, understanding prevailing wage, and winning highway work.
Starts muted when the player comes into view.
Read the full episode transcript
Published transcript from Scaling Legends. It may contain transcription errors. View the source transcript.
Right now, there is $209 billion just sitting on the table. Yeah, and mid -sized contractors are, well, they're deliberately looking the other way. Exactly. Welcome to this deep dive for Scaling Legends. I am Justine, your host, and I'm here to tell you that the biggest construction boom of our lifetime is happening right now. And you might be completely missing it. I'm Nicole. And we are so thrilled to have you joining us today. We really are, Nicole, because today we are going to dismantle the biggest misconception in the heavy civil market. Right, which is this perception that government work is just this impenetrable fortress of red tape. Yes, that is exactly what people think. But the reality is it's really just a matter of learning a new set of operational rules. It is. You know, usually when we talk
about growth in the construction industry, the prevailing advice is to just, well... Stay in your lane. Stick to what you know. Right. Like if you pour concrete for commercial tilt -ups, you leverage those relationships to find more commercial tilt -up. Exactly. Or if you do site prep for residential subdivisions, you just hunt for more subdivisions. It's comfortable. It is incredibly comfortable. I mean, you know your historical margins. You know how your private clients operate. And most importantly, your back office knows the paperwork inside and out. Oh, the paperwork is a big one. Right. But comfort does not equal security, especially when... private markets soften up. Exactly. And that is why we are looking over the fence at government work today, specifically highway and bridge construction. The stakes here are just astronomical. They really
are. We are looking at a projected $209 .1 billion for 2026. Wow. But here is the critical part. You know, we are on a ticking clock. A very loud ticking clock. Yes. The primary legislation funding this massive wave of work actually expires on September 30th of this year. Which is coming up so fast. It is. So we are going to weave that urgency throughout our conversation today because every single day you wait is a day that $209 billion pie shrinks. Let's unpack that $209 .1 billion number first because the scale of it is... Almost hard to comprehend. It really is. Where does that projection even come from? So that comes from RTBA, the American Road and Transportation Builders Association. Okay. It is fueled by the
IIJA, which is the Infrastructure Investment and Jobs Act. That act allocated $350 billion to highways over a five -year period. $350 billion. Yeah. And we are hitting the absolute peak of that funding right now. And what fascinates me, Nicole, is the mechanism of how this money actually reaches the street. Right. It's not what people think. No, it's not just one giant federal agency in Washington, D .C. handing out individual contracts. The vast majority of this is formula funding. And that is a crucial distinction. Formula funding is statutory. Meaning what exactly? It means states do not have to beg for this money or, you know, write massive speculative grant applications. Oh, thank goodness. Right. The federal government uses a mathematical formula based on a state's
population, its total lane miles and other demographic factors, and essentially just says, here is your check. Which provides incredible market certainty for contractors. Absolutely. I mean, 14 different states are receiving over $1 billion a year purely from these federal formula funds. It's staggering. And the top five heavyweights. Texas is at $5 .38 billion. California at $5 .06 billion. Florida at $2 .61 billion. New York is at $2 .59 billion. And Pennsylvania is right behind them at $2. $4 billion. And Justine, those numbers are actually conservative when you look at the total market volume. Yeah, conservative. How? Because that is strictly the federal contribution. Historically, state -funded work, which is money generated
from local gas taxes and vehicle registration fees, that adds another 40 % to 60 % on top of those federal numbers. 40 % to 60 % more. That is a staggering amount of capital hitting local markets. It really is. But, you know, the window of low competition is definitely closing. Competitors are absolutely waking up to this. Oh, without a doubt. I mean, we have seen a massive 160 % surge in Google trends for the exact phrase highway construction near me. That makes total sense. Contractors are feeling the pinch of high interest rates slowing down private commercial builds. Right. So they are hunting for that guaranteed government check. It is a totally logical pivot. But finding the work is usually the very first
hurdle. You can't just drive around looking for tower cranes like you can with commercial build. Right. And if you want to see exactly where that capital is landing, you need the right tools. Smart Business Automator's Market Intelligence Report tracks these highway project awards by state, district, and exact dollar value. Which is huge. It is. It just completely removes the guesswork and shows you the active pipeline right in your specific region. Because, you know, formula funding... pushes so much money down to the state level so quickly, the departments of transportation are desperate for construction capacity. They literally have more money than they have contractors to do the work. Exactly. Which brings us to a really important question. What exactly are these DOTs buying with all those billions? I want to offer an analogy here that I think completely
changes the perspective on this. Okay, let's hear it. I want you to think of a highway project not as a road, but as a horizontal commercial building. I love that. That is a perfect way to visualize it. It totally reframes the whole scope of work. Because if you were a commercial general contractor, you would never look at a 50 -story high -rise and say, well, I can't build that. I only do commercial framing. Right. You know, it takes dozens of specialized disciplines. Exactly. A highway is the exact same mechanism. Even if you don't own a single asphalt paver, there are massive subcontracting opportunities here. because a highway requires all the core disciplines you already possess. Let's break down those disciplines, because there are a lot of them. Paving is obviously the largest piece of the pie, right? We're talking about milling
off old asphalt, laying down overlays, and full -depth concrete replacements. But you cannot pave over dirt. No, you definitely need the foundation first. Right. Earthwork and drainage. Before a single ounce of asphalt is poured, someone has to move the earth. Earthwork is... The grading, the deep excavation, building up the embankments, it's the literal foundation of the infrastructure. And right underneath that is the drainage component. The storm sewers, massive concrete culverts, retention ponds. Exactly. If you are a civil contractor who usually does, say, site prep and underground utilities for shopping malls or data centers. This is the exact same iron moving the exact same dirt. Precisely. Then you move up to the structures, bridges and traffic. A massive chunk of this IIJA funding is specific. We also
have to highlight the traffic sector, Nicole, because the Smart Highway Initiative is absolutely booming. Oh, it's huge right now. We aren't just talking about painting lines on the asphalt, though. Let me tell you, striping is a highly lucrative niche. It really is. But we are talking about installing complex traffic signals, overhead dynamic messaging signs, concrete barrier installations. And trenching miles of electrical conduit for highway lighting and digital sensors. Exactly. And we cannot forget the unsung heroes of heavy civil work utilities and guardrails. Oh, the utility conflicts are endless. Every single time a state DOT widens a road by even a few feet, the inevitable... inevitably hit utility conflicts. Water mains, sanitary sewers, fiber optic lines, it all has to be relocated. Plus guardrail installation
and repair is just a consistent year -round life safety work. So the mechanism at play here is that state DOTs know absolutely no single prime contractor can self -perform all of this. Right. They rely on an army of specialized subcontractors to get these mega projects across the finish line. So if the work itself matches the exact skills contractors already have, what is the bottleneck? Why aren't mid -sized companies just flooding this market? Well, it really comes down to one massive gatekeeper DOT prequalification. Ah, there it is. Every single state department of transportation requires prequalification to bid as a prime contractor. Let's dive deep into this because this is the barrier that scares everyone away. It really does. I like to think
of DOT prequalification as... It's sort of like a corporate credit score. A corporate credit score is a brilliant analogy. Because you cannot just download a set of blueprints, build an estimate, and submit a bid tomorrow morning like you would in the private sector. Right. The DOP is acting as a fiduciary for the taxpayer. They are handing out contracts worth tens of millions of dollars. They need absolute certainty that your company has the financial health, the equipment, and the operational history to finish the job without going bankrupt halfway through pouring a bridge deck. Exactly. But the timeline is the real killer here. And this is where that ticking September 30th clock comes back into play. Right. Pre -qualification takes anywhere from 30 to 90 days to process. 90 days. Yes. So you must apply preemptively.
If you wait to find a project you like and apply the week before the bid is due, you are already way too late. Exactly. That 90 -day waiting period is burning precious daylight in our six -month window. And the requirements are heavy, Justine. They want an exhaustive list of your equipment fleet. They want detailed experience records for your key personnel superintendents, project managers. All of it. They need letters from your surety company proving your maximum bonding capacity. And most importantly, they want three years of financial statements. And in almost all cases, they require those to be audited by a CPA. I want to pause and challenge that slightly, though. Okay. Because for a guy running a $10 million shop, dropping significant cash on a full CPA audit feels like a massive, unnecessary gamble
just for the chance to bid. It absolutely feels like a gamble on the surface. But you have to look at the return on investment. Right. You spend the capital to get your financials formally audited, and it unlocks the door to a $209 billion market, where the client is the United States government. The checks literally never bounce. Exactly. It is an investment in guaranteed liquidity. That makes total sense. But let's say a listener is sitting there thinking, I just do not have the bonding capacity or the three -year commercial history to get pre -qualified as a prime contractor right now. Which is very common. Right. So what is the strategic play for them? the subcontractor strategy. You do not have to start as a prime. You don't? No. In fact, most highly successful
heavy civil firms do not. You start as a subcontractor to a prime who has already gone through the painful pre -qualification process. You essentially piggyback on their corporate credit score. Precisely. You build what we call a highway resume. You learn the DOT's inspection cadence, you learn their specific billing cycles, and you prove to the state engineers that you can execute the work to their standards and you do that for two years and suddenly applying for your own prime pre -qualification is an absolute breeze it really is and here is a massive tactical advantage for anyone listening if your company is eligible for DBE MBE or WBE certifications. The disadvantaged minority or women -owned business enterprises. Yes. You need to secure those immediately. The
leverage those certifications provide really cannot be overstated. Let's explain the mechanism of why it provides leverage. Okay. Federal highway projects mandate strict DBE participation goals, often around 10%. Right. If a prime contractor bids $50 million on a project... they are legally bound to allocate $5 million of that to certified GBE subcontractors. And if they fail to meet that quota, the DOT considers their bid non -responsive and literally throws it in the trash. Exactly. Primes are quite literally scrambling to find qualified DBE subcontractors. So if you hold that certification and you can actually execute the work, whether that is lane pipe or hauling aggregate, You aren't just a subcontractor anymore. You are a bid saver. You become an invaluable
asset to the prime just by existing on their team. And instead of guessing what your local agency requires, Smart Business Automator's Market Intelligence Report maps out the impending pre -qualification deadlines. Oh, so awful. And specific DOT requirements directly in your region. It is all about removing the friction from the process. So navigating pre -qualification gets you a seat at the table. But executing a federal highway project introduces a whole new set of job site rules. Oh, yeah. And this brings us to the ultimate friction point prevailing wage compliance under the Davis -Bacon Act. I can already hear contractors rolling their eyes right now. Oh, they definitely are. Yeah. Because they know the base hourly rate isn't the problem. The problem is the reporting. If I win a bid and I'm out on the job site and I have a guy jumping between different pieces
of equipment, the paperwork becomes a full -time job. You are hitting on the exact pain point, Justine. On a federally funded project, your labor costs are strictly set by the Department of Labor based on the project's specific county. You don't get to decide. No, you do not decide what you pay your crew. The local wage determination dictates it. But the complexity is entirely in the weekly certified payroll reports. Right, because this isn't just a summary spreadsheet you send to your accountant. Not at all. You have to detail each worker's exact classification, the exact hours they worked in that specific classification, their base rate, and their fringe benefits. Let's create a scenario to make this concrete. Let's say we have a midsize contractor. We will call him Bob's Excavation. Okay, Bob
wins a $2 million highway job. He is thrilled. Then he runs his first payroll. Bob's superintendent has a guy who usually pushes a general laborer jump into a skid steer for four hours to quickly move some dirt. On a private commercial job, that guy's just being a proactive team player. Exactly. But on a federal highway job, for those specific four hours, that worker is legally classified as an equipment operator and must be paid the higher operator rate. So if Bob misclassifies him on the certified payroll and pays him as a laborer... Bob is in violation of federal law. Wow. And the other massive trap for Bob is the fringe benefits, especially when it comes to calculating overtime. This is where margins go to die. Let's explain the math behind why this destroys margins. Prevailing wage requires you
to pay a base hourly rate plus a fringe benefit amount. You can pay that fringe into approved plans like health insurance, or you can just pay it as cash added to their hourly check. Let's say the base rate is $45 and the fringe is $15. Okay, that is $60 an hour straight time. But when that worker hits overtime, the law says you pay time and a half on the base rate, but the fringe rate usually stays at straight time. Right, so overtime should be 45 times 1 .5 plus 15. Which equals $82 .50. Exactly. back office doesn't understand the mechanism and they just calculate time and a half on the combined $60 rate. They pay $90 an hour. Yes. Bob is now bleeding margin on every single overtime hour worked.
And if he messes the math up the other way, he is underpaying his guys. And the stakes for underpaying are severe. We are talking about massive back pay liabilities. Worst case. The DOT terminates your contract for default. And worst case, a devastating three -year debarment from bidding on any federal work whatsoever. Three years in the penalty box will bankrupt a company that pivoted into government work without a compliance net. Which is exactly why you must change your estimating process. You cannot sit in your office and estimate a federal highway job using your standard blended shop rates. You have to learn the prevailing wage rates for your county. plug them into your estimating software, and bid the job based on the actual legal costs of labor. But the silver lining here is that it levels
the playing field. It really does. You aren't getting underbid by a competitor paying a less experienced crew cash under the table. Everyone bidding against you is legally bound by the exact same wage floor. So it becomes a game of operational efficiency, not cheap labor. Precisely. Now, we have covered the scale of the money. The types of work, prequalification, and navigating the compliance landscape. We really covered a lot. But we have to bring all of this back to the elephant in the room. The ticking clock. The September 30th cliff. Right. The Infrastructure Investment and Jobs Act expires on September 30, 2026. And as we sit here right now, there is no reauthorization bill that has been introduced in Congress to replace it. Which dictates everything about market timing. The construction industry
is used to standard economic cycles, but federal highway funding operates on these massive multi -year legislative cycles. And we are nearing the end of a historic five -year run. So what is the actual mechanism if September 30th comes and goes and Washington hasn't passed a replacement bill? Do the pavers just shut off the next morning? Not instantly. The active jobs do not instantly stop because that money is already obligated. Okay. But the future pipeline shrinks violently. If the law expires without a replacement, highway formula funding drops back to the baseline highway trust fund levels. Which is how much of a drop? We are talking about a potential 30 to 40 percent sudden decrease in available new work. A 40 percent drop in federal funding is a total market shockwave.
It absolutely is. The entire heavy civil industry is mobilized right now to prevent a funding gap. I know the Associated General Contractors, the AGC, is deeply concerned about this cliff. Oh, they have mobilized a $2 million campaign pushing Congress for reauthorization. But as a business owner, you cannot run your payroll on the hope that Congress acts efficiently. Never. You have to deal with the reality on the ground today. Which brings us to the six -month action plan. The golden window is right now. It really is. The funding for the current projects is allocated and certain. The next six months are when you must strike. Remember that 90 -day wait for prequalification, it is burning daylight. You need to use this window to get your DOT prequalification sorted out immediately. You need to aggressively network
to get on as a subcontractor, learn the Davis -Bacon compliance workflows, and lock in guaranteed contracts right now. Because if you look at the board, there are really only two possible outcomes. Scenario A, Congress passes reauthorization. And if you acted now, you are already pre -qualified, you have a highway resume, and you are perfectly positioned to ride the next five -year wave of funding from day one. Exactly. Scenario B, your authorization stalls and the market drops 40%. If you act now, you enter that funding drought with a massive backlog of federally funded, guaranteed work to carry your company safely through the lean years. It is the ultimate hedge against market uncertainty. It really is. Which brings me to a final thought I want everyone listening to. really mull over. Okay, let's hear it. Let's
say we hit that worst case scenario. Funding drops 40 % in October. The private commercial market remains sluggish. Which is very possible. There is going to be a brutal, unavoidable shakeout in the construction industry. The companies that waited too long, the ones that were terrified of the pre -qualification paperwork, they are going to starve. And when they starve, what happens to their assets? They go to auction. The contractors who use this exact six -month window to get pre -qualified and secure a massive backlog of government work will not just survive that downturn. They'll thrive. They will be sitting on guaranteed cash flow. They will be in the financial position to buy up the heavy equipment, the trucks, and the top -tier talent of the competitors who went under for pennies on the dollar. That is a profound
strategic advantage. Getting into this market isn't just about winning a waving job today. It is about positioning your company. to be the apex predator in your region when the cycle inevitably turns. But the window to capture it is rapidly closing. If you know a contractor who is looking for massive new revenue streams but terrified of government red tape, send them this episode. It could help them win a piece of this $209 billion pie before the funding deadline. Hit follow on whatever app you're listening on so you don't miss tomorrow's Intel. And to learn more about the AI tools helping construction teams scale and manage complex compliance workflows like prevailing wage without drowning in paperwork, visit smartbusinessautomator .com. The money is out there. Don't let the process intimidate you. Go get it.
